Samsung Xpress SL-M2070, SL-M2070W fix firmware [chipless]
| Model | Version firmware |
|---|---|
| M2070 M2070W M2074W M2078W | v3.00.01.06 v3.00.01.08 v3.00.01.15 v3.00.01.16 v3.00.01.17 v3.00.01.20 v3.00.01.22 v3.00.01.23 v3.00.01.24 v3.00.01.25 v3.00.01.26 v3.00.01.29 v3.00.01.30 v3.00.01.33 v3.00.01.37 |
.
Order
- Path: f:programlar 2011samsungresetyaziciusbsnchanger1 usbprns2.exe. Is it safe to have usbprns2.exe file on your PC: This file is SAFE What did other users said about usbprns2.exe file? Total users ( 53), 39 says I will keep this file, and 14 says I will remove it from my computer.
- 2) Place the “CLP-415NWV4.00.01.41.hd” file in the same folder as the “usblist2.exe” file 3)Hook your printer up to the USB and turn the printer off using the switch in the back. 4)Turn the printer back on and immediately press the orange “X” button on the printer rapidly.
- The next step is to download this file to printer. Enter TECH mode, activate download by 'Menu Data Setup Flash Upgrade Local OK' then type in command line 'usbprns2.exe FIXSCX4300V1.13Factromdl.hd' to start download. During download printer displays: Data receiving Flash erasing Flash Programming Checksumming Download Ok then printer will restart.
Show content of filename FIXSCX4300V1.23.ZIP from thread Samsung SCX-4300 regeneracja tonera File uploaded on elektroda.pl.
To create a fix firmware you need to send the data of your printer:
1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)
Hd Usbprns2.exe. Download
To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS, it has the ability to save reports, you can send this report to us
Instruction (Manual) for program firmware
1. Connect printer to computer and turn ON
- Wait until it is ready and Windows finish find driver
2. Extract the archive with firmware and run file download_1.bat or drag and drop file M2070_V3.00.01xXX.hd on usbprns2.exe
3. Wait for the printer to done programming (1-2 minutes) and then it will reboot itself.
4. Enter printer into DOWNLOAD MODE (forced mode)
- Turn printer OFF (by button «POWER»)
- Press button «STOP» and press button «POWER», and waiting in display of printer message «Press Stop to download mode»
- Quickly unpress all button and second press button «STOP»
- Printer show message «Wait Image»
5. Run file download_2.bat or drag and drop file P_NU_XXXXXXXXXXX_M2070_V3.00.01.XXx.hd on usbprns2.exe
6. Wait for the printer to done programming (1-2 minutes) and then it will reboot itself
7. After the firmware, you need to glue tape of toner chip and not allow other chips
8. Done, the firmware is finished.
Instruction (Manual) for program original firmware
1. Enter printer into Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop file M2070_V3.00.01.xx.hd on usbprns2.exe
Original firmware You can download in this Page
Enter Download Mode [forced mode]
- With the printer turned OFF, press hold the [Stop] button after [Power], and waiting in display of printer message «Press Stop to download mode»
- Then you see message «Press Stop to download mode» - need quickly unpress all buttons and second press button [Stop]
- Printer will show message «Wait Image»
New firmware
Firmware Samsung SL-C480/480W/480FW (SD) V3.00.01.21fCompatible models: Samsung SL-C480, Samsung SL-C480FW, Samsung SL-C480w
Firmware HP LASER 150A/150NW (SD) V3.82.01.08f + 5 dotsCompatible models: HP LASER 150A, HP LASER 150NW
Firmware HP LASER MFP 178FNW (SD) V3.82.01.07f + 5 dotsCompatible models: HP LASER MFP 178FNW
Firmware Xerox B215 (SD) // 10 symbols 85.000.58.000f // SN + 5Compatible models: Xerox B215
Firmware Xerox B210 (SD) // 10 symbols 85.000.58.000f // SN + 5Compatible models: Xerox B210
Hd Usbprns2.exe. Net
Before you continue with the reprogramming of the firmware, please make sure that the device is installed on your computer. Remove the chip from the cartridge or seal it up. And make sure that any other devices (except mouse and keyboard), which are connected to your computer via USB or LPT portsare disconnected. It’s preferable that the computer is connected to the 'UPS' (uninterruptible power source) device, because if during the reprogramming process the electricity source has any interruptions, then the reprogramming will be carried out with an error, which makes the device unable to work.
Be aware that with the reprogramming of the firmware the manufacturer’s warranty goes lost!!
1. Connect the device to your computer and turn it on while holding the button 'Stop'
2. 'Download mode' appears on the display
3. Click again the button “Stop” on your printer
4. After that, on the small screen should appear 'wait image1'
5. Usually after that on the screen below appears - new programs are installed and ready to use
Hd Usbprns2.exe. Mp3
6. As next, drag the reprogramming file 'FIX_SCX4623F_V2.01.00.96.hd' on the file icon 'usbprns2.exe'
7. When it’s done, the reprogramming begins automatically (5 min) and afterwards the device restarts
Hd Usbprns2.exe. Video
8. The reprogramming is completed, restart the device
Attention!!
The firmware reprogramming file is not protected against any updates from the Samsung website! Do not download any updates yourself!